OmniProGear 8mm prusik cord 11ft MBS 16.44kN (3700lbs) 20% stronger Made in USA

This kernmantle composite rope has a shock absorbent nylon core and a high abrasion resistant polyester cover that is soft enough to provide excellent holding power when tying prusik knots.
A rough length estimate for tandem prusik cords are 53 inches (without knots) and 65 inches ( without knots) which equals 130 inches, just shy of 11 feet.The 11 feet being sold in this package should be sufficient to create your own single or tandem prusik cords for most variations used. The correct length for each prusik cord is determined by the size of your pulley. Your small length prusik cord should nest up against the pulley with about 1/2" of space. The longer prusik should be about 5 inches from the bottom of the smaller one.
Material: polyester over nylon MBS: 16.44kN (3700 lbs) Weight Per 100ft: 3.1lbs Made in USA
Omniscience, Inc. Copyright © 2017 OmniProGear, Inc. All Rights Reserved. All bidders agree to a venue of Maricopa County, Arizona. All other brands and products referenced herein are acknowledged to be trademarks or registered trademarks of their respective holders.
These products are for mountaineering, rock-climbing industrial work and/or rescue use only. Mountaineering, rock climbing, industrial work and rescue are inherently dangerous. Any person involved in these activities must obtain qualified instruction of the proper use of these products prior to using them. Any person using these products is responsible for their own actions/decisions. FAILURE TO FOLLOW WARNINGS CAN CAUSE SERIOUS INJURY OR DEATH.